Log Placement - Napoleon Ascent X 36 Série Manuel D'installation

fi nishing
EN
10.6

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing ef-
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
fect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
pigments burn in during the heat-activated curing process. Blocked burner ports can cause an incorrect fl ame
more uniform as colour pigments burn in during the heat-activated curing process."
pattern.
Insert only if
applicable ---->
Stud (Log #1)
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
Stud (Log #2)
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Stud (Log #3)
52
W415-1849 / A / 03.06.19
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Burner Ports
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
A1
B1
C1
Burner Overview
Pilot Shield
A2
B2
D1
Studs (Log #4)
Stud (Log #1)
Stud (Log #2)
D2