Rinnai E50CRN Manuel D'installation page 34

6.7.3.1
808000023
2
3
4
1
6
A
B
C
OK
boiler conversion from parallel
to concentric figure 14a
34
Boiler conversion from parallel to concentric (E50CRN)
Concentric vent adapter (Part. nr. 808000023) consists of:
1. Cover air intake
2. Gasket 3"
3. Gasket 5"
4. Concentric adapter
5. Plugs for measuring points
6. Gasket 3"
5
A. Push the 2 clips of both 3" connections slightly inwards
B. Pull both 3" connections out of the boiler
C. Connect the concentric vent adapter.
- Check if all rubber seals (2, 3, 5 and 6) are positioned on the concentric vent
adapter
- Push the concentric vent adapter in the boiler, in the boiler exhaust pipe until
'CLICK'
- Press the 3" cover (1) in the connection at the back until 'CLICK'.
.