Wilo Control SC-Booster Notice De Montage Et De Mise En Service page 90

Valid until Display
SC
SC...FC
SC
SC...FC
SCe (p-c)
SC...FC
SCe (p-c)
SC...FC
SCe (p-c)
SC...FC
SCe
SC...FC
SCe
SC...FC
SCe
SC...FC
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe)
Description
The threshold for switching off the third peak-load
pump relative to the active setpoint
The absolute threshold for switching off the third
peak-load pump.
This value is automatically calculated based on the
relative threshold and the current setpoint.
Speed thresholds for activation and deactivation of
pumps
Activation threshold of the peak-load pump(s)
based on the speed of the base-load pump
Deactivation threshold of the peak-load pump(s)
based on the speed of the base-load pump
PID controller parameter menu
Proportional factor
Integral factor
English
Parameter range
Factory setting
100... 105 ... 125
78 ... 98 ... f -2
max
SCe:
f +2 ... 32 ... 75
min
SC...FC:
f +2 ... 42 ... 72
min
0.1 ... 2.0 ... 100.0
0.0 ... 0.3 ... 300.0
19