Checks And Maintenance; Spare Parts - Güde GE 290 TC Mode D'emploi

Welding current not
available

Checks and Maintenance

Checks and Maintenance Safety Instructions
The unit may be a reliable tool only if maintained and cared for on a regular basis. Insufficient maintenance
and care may cause unexpected accidents and injuries.
Check and Maintenance Schedule
Time Interval
Before each start of work

Spare Parts

Returns of goods and orders of spare parts will be carried out fast in an expeditious manner
by means of an applicable servicing form to be downloaded at
http://www.guede.com/support
The form may be also requested at
Tel.: +49 (0) 79 04 / 700-0
Fax: +49 (0) 79 04 / 700-250
E-Mail: info@guede.com
1. Reverse conduct of the welding
current doe not provide right contact
Thermal protection light on
2. Defective electronics
Description
•
Check the unit for correct function. Never work with defective unit.
•
Check the cable for damage. Replace it with a new one of same quality if
necessary.
1. Check the reverse line of welding current
for good contact
2. Let the unit cool down. The work may be
continued when the light indicator goes off
.
3. Inform servicing department
17
GB
Other
Details