Transport And Storage - Güde GE 235 TC Traduction Du Mode D'emploi D'origine

Dispositif de soudage par electrodes
Masquer les pouces Voir aussi pour GE 235 TC:
Table des Matières

Publicité

Material and other substances hazards
Threat
Contact, inhalation
Fire or explosion
Failure to Observe Human-Factor Principles
Threat
Negligent use of personal
protection equipment
Disposal
The instructions for disposal are expressed in the pictographs on the unit or the packaging. For description
of individual meaning see chapter "Unit Marking".
Ope ra t or Re quire m e nt s
The operator is required to read the instruction manual carefully before using the unit.
Qualification
The unit is designed to be used by trained arc welders or instructed persons of similar qualification.
Minimum Age
The unit shall be operated by persons above 18 years of age.
Operation by juvenile operators is an exception, if it is as a part of professional training under supervision of
a teacher with an aim to obtain skills.
Training
Only trained persons should operate the unit. This operating manual should be made available to each
user. .
T e c hnic a l Da t a
Voltage/Frequency:
Max. welding current :
Regulated zone :
Electrode diameter Ø:
Idling voltage :
Protection class :
Insulation class :
Weight :
Ordering no.:
T ra nsport a nd St ora ge
The unit should be stored at a dry place out of the reach of unauthorised persons. Make sure that the unit
is unplugged.
Remember that the electrodes too have to be kept at a dry place.
Description
Long-lasting inhalation of fumes
in the course of welding may be
health hazardous.
Easily inflammable materials
may ignite in direct area of
welding.
Oil, fuel or gas tanks may
explode at welding
Description
Welding without required
personal protection equipment
may result in health hazard.
230 V/400 V; 50 Hz
190 A
40 – 190 A
2 – 4 mm
48 V
IP 21 S
H
22,4 kg
20005
Preventive Action
Have the fumes extracted
when welding
Work in a properly ventilated
area
Avoid direct inhalation of
fumes
Do not work near
inflammable materials.
Tanks of any kind should be
completely emptied, cleaned
and well-ventilated. Only
properly trained
professionals are allowed to
weld tanks.
Preventive Action
Use required personal
protection equipment for
welding.
GB
Residual Hazard
Residual Hazard

Publicité

Table des Matières
loading

Table des Matières