Technical Data - ST Quadrat LUX-top FALZ-PLUS Manuel D'utilisation

Masquer les pouces Voir aussi pour LUX-top FALZ-PLUS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Use / system description:
®
LUX-top
FALZ-PLUS
The
Type A + CEN/TS16415:2013, which is used to anchor personal fall protection equipment
for working in areas in which there is a risk of falling.
It can be installed on diverse load-bearing substrates in accordance with the relevant
installation instructions.
®
LUX-top
FALZ-PLUS
its bar.
If used in accordance with the regulations, the maximum characteristic force input into
the structure by the anchor device in case of a fall is 8 kN as a single anchor point and
12kN as a start/end point in rope systems.
®
LUX-top
FALZ-PLUS
The
with full body harnesses and energy absorbers (including 1 person for giving first aid /
rescue).
An anchor point already deformed by a fall can still be used for the rescue of a person
who has fallen from a height.
®
LUX-top
FALZ-PLUS
The
363:2008:
Restraint systems
Fall arrest systems
Rescue systems
The respective user instructions of the other PFPE and abseiling (descent) and
rescue equipment used must also be noted and followed!
®
LUX-top
FALZ-PLUS
The
systems for rope-assisted access techniques (abseiling work, etc.)!
®
LUX-top
FALZ-PLUS
The
®
LUX-top
FALZ-PLUS
1
User instructions
Installation instructions

Technical data:

Anchor point type:
Overall height:
Variability:
narrow body: 330 – 460 mm distance between standing seams
wide body:480 – 610 mm distance between standing seams
Anchor point material: Stainless steel W1.4301 / AISI 304
Clamping jaw material: aluminium
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
system is an anchor point in accordance with EN 795:2012
is intended for loading in all directions transversely to the axis of
anchor device is approved for simultaneous use by 3 people
can be used in the following fall protection systems to EN
is not suitable for use as an anchor point for suspension
anchor device consists of the following components:
anchor point complete with anchor eye and fixings
page 8
version 01/2016
®
LUX-top
FALZ - PLUS
170 mm (total height)

Publicité

Table des Matières
loading

Table des Matières