ST Quadrat LUX-top FALZ-PLUS Manuel D'utilisation page 20

The lanyard must always be set as short as possible, even when fall arrest systems
•
are used, in order to reduce any free-fall height in case of a fall to a minimum. It is
essential for safety that the position of the anchor device and the plan of work are
chosen so that the free fall and the fall height are limited to a minimum. Ideally, a
fall over the edge should be completely prevented by appropriate use of the
PPE against falls from a height.
Position the anchor device on the building so that in case of a fall over the roof edge,
•
the maximum possible fall factor is 1.
Please note that failing to follow these user instructions, and if the documentation is
•
incomplete, all claims for compensation are excluded.
The manufacturer must be contacted in case of any uncertainty during installation or
•
use of the system!
A standard operating procedure with information on the location and use of the anchor
•
devices should be attached at the access to the safety system (e.g. roof hatch).
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
page 4 version 01/2016