Publicité
8A-1-4 HOW TO USE THIS MANUAL
OK
NO!
NO!
OK
NO!
NO!
· When installing the wiring harness, fix it with clamps so that
no slack is left.
· When installing vehicle parts, be careful so that the wiring
harness is not interfered with or caught by any other part.
· To avoid damage to the harness, protect its part which may
contact against a part forming a sharp angle by winding tape
or the like around it.
· When replacing a fuse, make sure to use a fuse of the speci-
fied capacity. Use of a fuse with a larger capacity will cause a
damage to the electrical parts and a fire.
· Always be careful not to handle electrical parts (computer,
relay, etc.) in a rough manner or drop them.
Publicité
Chapitres
