FLUX F 520 S-50/45 Mode D'emploi page 12

Starting Operation
! Immerse the pump into the liquid and secure it in a vertical
position by the use of a compression gland or a container
clamp.
! Before inserting the electrical plug into the socket or
before connecting the air supply hose to the motor,
set the Start/Stop switch to "0" (Stop). On compressed air
motors, close the ball valve in the air supply line.
! Insert the plug or connect the air supply hose.
! Switch on the motor.
! When using compressed air motors, adjust the speed by a
ball valve in the air supply line.
Do not exceed the maximum speed of 3000 min
12
-1
(rpm).