Cleaning after each operation
Clean the pump by flushing an appropriate cleaning agent.
! Pump and hose must be resistant to the cleaning agent.
! The pump should not be immersed into the cleaning agent
deeper than the outlet connection.
! Do not use flammable liquids to clean pump or motor.
! After each operation with sticky or self hardening products,
the pump should be flushed with a suitable cleaning agent.
The pump should then be dismantled and the sliding ring
gasket and the lower bearing be carefully cleaned.
Storage
! Unplug the pump or disconnect the air supply hose.
! Use a wall bracket to store the pump in a vertical position.
13