Toto EcoPower TET2GA Manuel D'installation Et D'utilisation page 8

INSTALLATION PROCEDURE — LARGE COVER
7. Pass the flush pipe and the vacuum
breaker through the guide hole (Step
3) and mount them on the bowl.
8. If required, cut the vacuum breaker
tube to the proper length.
9. Make sure that the o-ring fits in the
groove at the end of the Flush Valve
tailpiece.
NOTE: Exercise care to avoid damaging the
o-ring when inserting the tailpiece
into the control stop. If lubrication is
needed, wet the o-ring with water.
10. Connect the Flush Valve with the control
stop and vacuum breaker tube.
TET2LA32, TET2GA32, TET2UA32
TEU2LA12, TEU2UA12
7" (178mm) Min space
requirement in wall
Wall surface
6~6-1/2"
(152~165mm)
1-1/2" (38mm)
or 3/4" (19mm)
Top spud
5"
(127mm)
2-1/4"~2-3/4"
(57~70mm)
3-3/4"~4-7/8"
Bowl or Urinal
(95~124mm)
TET2LA33, TET2UA33,
TET2GA33
7" (178mm) Min space
requirement in wall
Wall surface
Back spud
Floor mount
3-3/4"~4-7/8"
Bowl
(95~124mm)
8
TET2LA31, TET2UA31
TET2GA31
7" (178mm) Min space
requirement in wall
Wall surface
Back spud
Wall mount
3"
(76mm)
Bowl
TEU2LA11, TEU2LA21
TEU2UA11
7" (178mm) Min space
requirement in wall
Wall surface
1-1/4" (32mm)
or 3/4" (19mm)
1-1/2"
(38mm)
Urinal
1-1/2"
(38mm)
3-3/4"~4-7/8"
(95~124mm)
3-3/4"~4-7/8"
(95~124mm)