Bushnell TROPHY CAM HD AGGRESSOR Mode D'emploi page 28

Masquer les pouces Voir aussi pour TROPHY CAM HD AGGRESSOR:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

environment and your subject, the farther the possible sensing distance. The average
sensing distance is about 60 ft.
Before leaving the camera unattended, please check for the following:
• Are the batteries or DC power supply (Bushnell solar panel) inserted/connected
with correct polarity and is the power level is sufficient?
• Does the SD card have sufficient available space and is its write-protection
(lock) switch off?
• Is the Power switch in the ON position? (do not leave it in SETUP).
About the ARD (Anti Reflective Device)
A removable filter grid (ARD) covers the LED flash, so that light reflections from the
protective black glass panel over the LED array are greatly reduced. This helps to
prevent detection of the camera by animals (and potential thieves). If getting maximum
light output from the LED flash is a higher priority than concealment, the ARD grid
may be easily removed by inserting a small screwdriver, key, etc. in the slot at the
lower center of the ARD (above the camera lens), and gently pulling it up away from
the camera (see pg. 7).
REVIEWING/DELETING THE PHOTOS/VIDEOS
After you have setup, mounted and activated your Trophy Cam HD Aggressor, you
will of course be eager to return later and review the images it has captured for you.
There are several different ways this can be done.
Reviewing Images Directly From the SD Card
This is the most popular method of viewing images. Since unmounting the camera and
taking it to your computer isn't very convenient, you may find it easier to just take the
card out. By removing the SD card (swapping it for a new empty card if you like) and
taking it to your home or campsite to view the images by using an SD card "reader"
(user supplied) connected to your computer (some computers and TVs have a built in
SD card slot), you can leave the camera in place ready to capture more images. Once
connected, the card reader works the same way as described below-please read that
section if you have any problem finding your files.
28

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

119874119875119876119877

Table des Matières