Bushnell TROPHY CAM HD AGGRESSOR Mode D'emploi page 24

Parameter
Coordinate
Input
Video Sound
(only affects
video clips in
Video or Hybrid
modes)
Default Set
Version
24
Settings
(Bold=default)
Off, On
See "Using the
Setup Menu
Input Screens"
On, Off
Cancel,
Execute
none
Description
Allows the user to input latitude and
longitude coordinates for the camera's
location. This data will be embedded in
the files saved on the camera's SD card (if
"On" is selected). This makes it possible to
see each camera's location as a "pushpin"
on Google Earth maps when reviewing a
folder full of photos from multiple cameras,
or use other "geotag" capable software
(Picassa, etc).
Select "On" to record audio along with
the video when the camera is set to video
mode (saved file sizes will be slightly
larger).
Select "Execute" and press OK to restore
all parameters to the original factory default
settings. If the camera is behaving oddly
and you think you may have changed
the setting for something accidently (but
aren't sure which one), this will reset all
parameters to their most commonly used or
"generic" settings.
Displays current firmware version for
reference.