Bushnell TROPHY CAM HD AGGRESSOR Mode D'emploi page 23

Parameter
Format
Time Stamp
Field Scan
Settings
(Bold=default)
Execute (followed
by an additional
No/Yes step)
On, Off
Off, On
(After On is
selected): "A"
Start/Stop, "B"
Start/Stop,
Interval
Description
Deletes (erases) all files stored on a card to
prepare it for reuse. Always format a card that
has been previously used in other devices.
Caution! Make sure you have downloaded
and backed up any files you want to
preserve first! Press OK to execute, press
MENU (or select NO then press OK) to exit
without formatting.
Select "On" if you want the date & time (that
the image was captured) imprinted on every
photo/video, select "Off" for no imprint. Note:
the current temperature, moon phase, and
(user set) camera name will also be imprinted
on your still photos.
Turns Field Scan (Time Lapse) recording mode
on/off. When activated, Field Scan forces the
camera to take photos or videos even when it
is not triggered by a nearby live animal, useful
for constant monitoring of an area that might
be far away from the camera. The user can set
the start and stop times for up to two inde-
pendent "blocks" of Field Scan recording, as
well as the interval time between each photo/
video. To ensure correct operation, avoid
setting overlapping start/stop times for Field
Scan A and B. Please read the "Field Scan
2x..." section of this manual for details on us-
ing this feature. NOTE: If the "Camera Mode"
parameter is set to "Day" or "Night" operation
only, that will take priority over your Field Scan
settings. Set Camera Mode to "24HR" if you
are setting day and night Field Scan start and/
or stop times.
23