Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Comfort Electronics K4,
Operation, Maintenance, Troubleshooting
36
Closing the
Program Menu
(Possible at any time without
saving any changes.)
Press the >42° (
) button
to leave the program menu.
Resetting program values
to the
factory settings
(Resets all program values to
factory settings.)
Press the >42° (
) and
Overhead shower ( ) but-
tons for at least 5 seconds un-
til RES apears (press the
>42° (
) button again to
stop the reset).
Press the Mode (
) button:
The reset is performed.
Resetting to the factory
settings for mixer tem-
perature / setting curves
(Resets all system configu-
ration values to factory
settings.)
Press the >42° (
) and
Hydromassage (
)
buttons for at least 5 seconds
until trC appears (press the
>42° button again to stop the
reset).
Press the Mode (
)
button:The reset is performed.
Publicité
Table des Matières
