Packing List - EGO CS1400E Manuel De L'opérateur

Sound pressure level at 85.73 dB(A)
operator's ear L K =2.5 dB(A)
PA PA
Guaranteed sound
power level L 100 dB(A)
WA
(according to 2000/14/EC)
Rear 5.373 m/s
Handle K=1.5 m/s
Vibration a
h
Front 4.146 m/s
Handle K=1.5 m/s
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used;In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.

PACKING LIST

PART NAME
Chain saw power head
Saw chain
Guide bar
Chain sheath
Operator's manual
DESCRIPTION
KNOW YOUR CHAIN SAW (Fig. A)
1. Trigger Switch
2. Lock-off Button
3. Battery-release Button
4. Oil Tank Cap
5. Oil Inspection Window
6. Saw Chain
7. Guide Bar
8. Latch
9. Ejection Mechanism
10. Electric Contacts
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E
11. Chain Kickback Brake Handle
85.4 dB(A)
12. Chain Tensioning Knob
K =2.5 dB(A)
PA
13. Front Handle
14. Rear Handle
99 dB(A)
15. Chain Tensioning Screw
3.222 m/s
2 2
16. Side Cover
2 K=1.5 m/s 2
17. Side Cover Knob
2 3.081 m/s 2
18. Chain Sheath
K=1.5 m/s
2 2
19. Lubricating Hole
20. Sprocket in Guide Bar Tip
NOTICE:
lever for chain brake activation. It also provides protection
against projecting branches and helps prevent the left hand
from touching the saw chain if it slips off the front handle.
ASSEMBLY
WARNING:
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
QUANTITY
WARNING:
or create accessories not recommended for use with this
1
chain saw. Any such alteration or modification is misuse
1
and could result in a hazardous condition leading to
possible serious personal injury.
1
WARNING:
1
cause serious personal injury, always remove the battery
1
pack from the tool when assembling parts.
WARNING:
user should, as a minimum, practice cutting logs on a
saw-horse or cradle
ASSEMBLING/REPLACING THE BAR AND CHAIN
WARNING:
bar and chain; these components are sharp and may
contain burrs.
1. Position the chain saw power head on its side with
the side cover facing upwards (Fig. H).
2. Turn the side cover knob counterclockwise to remove
the side cover and then loosen the chain tensioning
knob as much as possible.
3. Lay the new saw chain in a loop on a flat surface and
straighten any kinks (Fig. I).
The chain kickback brake handle services as the
If any parts are damaged or missing,
Do not attempt to modify this product
To prevent accidental starting that could
It is recommended that the first-time
Always wear gloves when handling the
EN
11