Würth 1952 003 701 Traduction Des Instructions De Service D'origine page 9

ONLY EXPERT PERSONNEL ARE ALLOWED TO USE
THIS TOOL
NECESSARY EQUIPMENT:
- Pneumatic screwdriver
PROCEDURE:
• After placing the car on a lift and raising it, lift the tool and
attach the first traction belt to the service belt, the tool remains
upright and firmly fixed (fig. 3).
• Attach the second traction belt, located opposite the service belt,
to the oscillating arm or the vehicle's frame (fig. 4).
• Use a pneumatic screwdriver to put the levers in traction, paying
attention to place the rubber supports underneath the frame's
point of force. (fig. 5).
• Use a hammer to hit the conical centering of the oscillating arm
to detach it (fig. 6).
• Use the pneumatic screwdriver to fully detach the oscillating arm
(fig. 7).
ATTENTION
IT IS COMPULSORY TO RESPECT THE MAX TORQUE
50Nm
DISPOSAL:
For proper tool maintenance and operation, we recommend that
you clean threads and surfaces using a soft cloth on a regular basis.
ELIMINACIÓN:
TENSION AND SERVICE
BELTS
STAINLESS STEEL
COMPONENTS
5
6
7
9