Getting To Know Your Device; Signs And Symbols - Sanitas SBC 21 Mode D'emploi

Contents

1. Getting to know your device .......................................... 12

2. Important notes .............................................................. 12
3. Unit description .............................................................. 15
4. Preparing the measurement ........................................... 16
5. Measuring blood pressure ............................................. 17
Please read these instructions for use carefully and keep them
for later use, be sure to make them accessible to other users
and observe the information they contain.
1. Getting to know your device
The wrist blood pressure monitor is used to carry out non-
invasive measurement and monitoring of arterial blood pressure
values in human adults. This allows you to quickly and easily
measure your blood pressure and to display the last recorded
measurement.
A warning is issued for anyone suffering from cardiac ar-
rhythmia.
The recorded values are classified and evaluated graphically.
2. Important notes

Signs and symbols

The following symbols are used in these instructions for use,
on the packaging and on the type plate for the device and the
accessories:
ENGLISH
6. Saving and displaying measurements ........................... 19
7. Deleting stored values .................................................... 19
8. Error message/troubleshooting ...................................... 19
9. Cleaning and storing the device and cuff ....................... 19
10. Technical specifications ............................................... 19
Storage
60°C
-20°C
RH 10-95%
12
Attention
Note
Note on important information
Observe the instructions for use
Application part, type BF
Direct current
Dispose of the device in accordance with EC
Directive - WEEE (Waste Electrical and Elec-
tronic Equipment).
Manufacturer
Permissible storage temperature and
humidity