Indel B FM7 BACK Instructions D'utilisation page 38

FM 7
D E S C R I P TI O N O F TH E CO NTR O L PA N E L
1 SET button - Alarm reset or temperature increase
2 SET button - Alarm reset or temperature decrease. ON/OFF of the device
3
Display
4 Green led for proper operation
5 Red alarm led
ALARM RESET
SET
1 2
U S E O F TH E CO NTR O L PA N E L
• To turn the device on, press the button 2.
• To switch it off, press the button 2 for 5 seconds.
• When the green LED 4 is flashing on and off, the device is reaching its operating temperature and is
not yet ready for operation.
As soon as the device reaches the preset operating temperature, the light of the green led 4 is steady;
•
the device is ready to be used.
S E T TI N G I NTE R N A L TE M PE R ATU R E
• Simultaneously press buttons 1 and 2 for 10 seconds to enter the temperature adjustment function: the
display 3 with the set temperature flashes.
• Use the keys 1 and 2 separately to increase or decrease the temperature to be set.
• Do not press any key when the desired temperature is reached (between 2 °C and 8 °C): the preset
value is automatically saved.
A L A R M
If the preset temperature varies more than ± 1.5 °C, the red led 5 comes on and flashes intermittently. At the
same time an audible alarm (buzzer) is activated.
Check and eliminate the cause of temperature change and press keys 1 and 2 at the same time to deactivate
the alarm state.
FM7 REV. 01 - FEBRUARY 2019
4
OK
ON
OFF
5
36
3