Indel B FM7 BACK Instructions D'utilisation page 32

FM 7
R E M OV I N G A N D R E M OTE LY CO NTRO LLI N G TH E CO O LI N G U N IT
The entire cooling unit 1 can be removed if required, and then it can be placed in a remote position in
relation to the device, at a maximum distance of 1.5 meters.
Remove the cooling unit as directed below:
• For FM7 TOP loosen the four screws 2A using a long cross-head screwdriver.
• For FM7 BACK loosen the six screws 2B using a long cross-head screwdriver.
Raise the cooling unit 1 and slowly unwind the suction hose 3.
•
• Install the cooling unit 1 in a stable and protected position.
FM7 BACK
2B
FM7 REV. 01 - FEBRUARY 2019
2A
2B
3
L = 1,5 m
FM7 TOP
30
2A
3
2A
1
1