Indel B FM7 BACK Instructions D'utilisation page 34

FM 7
R E VE R S I N G TH E O PE N I N G S I D E O F TH E D O O R
The opening side of the door can be reversed from right to left or vice versa if required.
Proceed as directed below to reverse the opening of the entire door unit:
• Remove the bottom flange 1 by loosening the four fixing screws, two for each side.
• Remove the hinges 2 and 3 secured to the frame of the device by loosening the fixing screws.
Remove the "L"-shaped bracket 4 in position C by loosening the fixing screws.
•
• Remove the hinges 5 and 6 secured to the door of the device by loosening the fixing screws.
• Remove the plugs 7.
• Install in position C the hinge of the door that was previously in position A.
• Install in position D the hinge of the door that was previously in position B.
• Install the plugs 7 and install the "L"-shaped bracket B in its position 4.
• Install the hinges previously secured to the frame in the opposite side (positions C and D).
• Secure the bottom flange 1 to the frame of the device.
FM7 REV. 01 - FEBRUARY 2019
C
D
B
4
A
3
7
1
32
5
2
7
6