Technical Description - Indel B FM7 BACK Instructions D'utilisation

TECHNIC AL D E SCRIP TIO N
The refrigerator in this manual, also called "device", generates cold by vaporizing at a low pressure
a liquid refrigerant fluid, HFC, within a thermal exchanger (evaporator). The steam obtained that
way is then made liquid again by means of a mechanical compression with a higher pressure (by
means of a compressor), followed by a cooling down performed in another thermal exchanger
(condenser). The correct and uniform distribution of the air inside the refrigerated chamber is
guaranteed by a electrical fan.
The device is made of a modular monocoque, covered with suitable and diversified materials
and insulated with expanded polyurethane with a density of 42 kg/ m .
3
Displays and dials are all located in the front panel.
The refrigerated chamber is equipped with racks, that serve as a support for wire shelves (grid).
LIST OF THE MAJOR ASSEMBLIES
1 - stainless steel frame;
2 - a door to access the internal compartment, made of stainless steel;
3 - an internal cooled compartment, including an retaining wall compartment for products,
provided with a grid;
4 - refrigerating unit with compressor; which can be removed and operated in remote mode,
if required;
5 - control panel.
5
4
1
2
3
23