KERN and SOHN KXS-TM Instructions D'utilisation Et D'installation page 87

 To confirm, press
noLin = Adjustment
LineAr = Linearisation
 For adjustment press
 Ensure that there are no objects on the weighing pan.
Wait for stability display, then press
The currently set adjustment weight will be displayed.
 Either apply the displayed adjustment weight or make changes with the help of
the navigation keys (see chap. 3.1). Confirm by
 Carefully place adjustment weight in the centre of the weighing plate.
Wait for stability display, then press
 After the adjustment the balance will carry out a self-test. Remove adjustment
weight during selftest, balance will return into weighing mode automatically.
KXS_KXG-TM-BA_IA-e-1932
and the current setting will be shown.
to select setting < noLin> and confirm by
.
.
.
, „LoAd" will be shown.
17