KERN and SOHN KXS-TM Instructions D'utilisation Et D'installation page 117

SPEEd
-nt
P2 CoM ModE
Interface
parameter
bAud
Pr
rPS
PtyPE
Lab
Prt
LanG
rtC
rtCFO
rS485
bLAnK
KXS_KXG-TM-BA_IA-e-1932
Reaction speed,
selectable 0, 1, 2, 3, 4, 5*, 6, 7, 8, 9
< 0 >: Sensitive/fast

< 9 >: Insensitive / slow
Negative tare: on-off*:
Function only to „on", when the weighing system is not
used in the open sales outlets. Function permits reduction
of the tare weight, pressing the TARE-key.
Function only available, when P4 oth- St (Multitara) to „on".
One output for stable weighing value.
St1*
Return to zero needed between values.
One output for stable weighing value. No
St2
return to zero needed between values.
Continuous data output of stable weighing
StC
values
An issue takes place after pressing the
Pr1
PRINT key.
Manual totalizing, see chap. 10.2
Pr2
The weight value will be added into the summation
memory and issued after the M+-key was pressed.
For automatic totalizing see chap. 10.3
This function is used to issue and add individual
Auto
weighing values automatically to the summation
memory on unloading of weighing scale.
For remote control commands, see chap.
CoMAnd
13.4
Continuous data output
Cont
Available baud rate: 600, 1200, 2400, 4800, 9600*,
19200
E71
7 bits, even parity
o71 7 bits, odd parity
n81* 8 bits, no parity
Continuous data transfer
Select interval 1, 2, 4, 8 16 or MAX*
PtUP*
Standard printer setting
Lab x
For data output format see chap. 13.2
Prt x selectable 0*, 1, 2, 3
ENG* Standard settings English
Set RTC (date/time)
Set format for date, selectable
<year_month_day> or <day_month_year>
Enter ID for RS485 interface
off*
Print a blank line on output format
on
47