KERN and SOHN KXS-TM Instructions D'utilisation Et D'installation page 90

 For linearization press
 Ensure that there are no objects on the weighing pan.
Wait for stability display, then press
 When "Ld 1" is displayed, put the first adjustment weight (1/3 max) carefully in the
centre of the weighing platform. Wait for stability display, then press
 When "Ld 2" is displayed, put the second adjustment weight (2/3 max) carefully in
the centre of the weighing platform. Wait for stability display, then press
 When "Ld 3" is displayed, put the third adjustment weight (max) carefully in the
centre of the weighing platform. Wait for stability display, then press
After the adjustment the balance will carry out a self-test.
 Remove adjustment weight during selftest, balance will return into weighing
mode automatically.
20
to select setting < LinEr>, to confirm, press
.
.
.
KXS_KXG-TM-BA_IA-e-1932
.
.