Niko 10-576 Mode D'emploi page 73

9.7. Set the ringtone volume
9.8. Ringtone selection
9.9. Set speech volume
9.10. Setting image parameter
EN
• Press the navigation key RIGHT (or LEFT). The symbol ringtone volume is already selected.
• Press the navigation key up or down to change the volume.
The volume setting of the ringtone (0 tot 3) can be seen on the display. The set ringtone is displayed
with the selected volume and saved.
• Press the navigation key up or down, to navigate to the symbol for ringtone selection (e.g. for door 2).
• Press the navigation key up or down to select the ringtone.
The number of the ringtone (e.g. 11) appears on the display. The selected ringtone is displayed and
saved.
... during existing speech connection with the door:
• During a speech connection, press the menu key
The menu for setting the image parameters
and the symbol for setting the speech volume are now displayed.
• Press the navigation key up or down to change the value.
The set value is immediately saved.
Symbols in the live image
Upon activating the image (by pressing the image key, upon receiving a door call), the symbols in the
live image can be selected during 10 sec. After pressing the speech button, the symbols in the live
image can be selected for 3 sec.
• Press the image key or the speech key to activate the live image.
The symbols for switching off ringtone, ring-and-come-in, call diversion,
screen memory mode only appear if the function is activated
10-576
73