Niko 10-576 Mode D'emploi page 71

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Set video BP-border and door call BP-border
Image connection upon incoming floor call (floor video function)
Assign short text message groups
Screen memory 10-845 always locked
Screen memory 10-845 on / off (in the comfort mode)
9.2. Load factory settings
All manually set settings can be returned to the factory setting.
• Simultaneously hold the navigation keys up and down for 8 s.
A confirmation signal sounds. The factory setting was successfully loaded.
9.3. Programming the function key with the service unit
The internal unit functions as a simplex speech device. Use commands "9" to configure comfort-simplex speech device (see product information Service unit 10-870):
Programming using the commands "9" must be launched once using the command *95 # Ser.-Nr. #. After, program the function key with the service unit.
Introduction
Call diversion
Ring-and-come-in
Internal call
Control function 8
Restore light switch function
Parallel assignment
Deactivation of the parallel assignment = assigning
serial number 0.
Ser.-No.: the serial number of the newly to be configured internal unit
TargetSN.o: the serial number of the target internal unit to which it must be diverted.
IntSNo.: the serial number of the target internal unit which must be internally called.
ParSNr: the serial number of the internal unit to which a newly to be configured internal unit is assigned.
9.4. OSD-menu
You can move through the OSD-menu, in the displayed screen memory
functions are configured. Symbol are only displayed in the OSD-menu once that function has been configured (screen memory settings and short messages).
Niko Configuration SW is necessary to activate the Screen memory and Short messages functions.
The live image can be activated by pressing the image key or the speech key. On receiving an video call, the live image is automatically activated.
The live image switches off automatically:
• if no keys are pressed for 80 sec.
• if the speech connection is terminated
• if the video channel is used by another device (not during speech connection).
a) only if 10-845 is installed
EN
95
90
91
92
93
94
99
a)
and in the live image using the navigation keys up and down. Upon delivery, not all
Ser.-Nr.
Ser.-Nr.
ZielSNr.
Ser.-Nr.
Ser.-Nr.
IntSNr.
Ser.-Nr.
Ser.-Nr.
0
Ser.-Nr.
ParSNr.
10-576
x
x
x
x
x
71

Publicité

Table des Matières
loading

Table des Matières