Precautions And General Guidelines; Safety Warnings - Panduit CP-991 Mode D'emploi

© Panduit Corp. 2018
3.

PRECAUTIONS AND GENERAL GUIDELINES

The basic condition for safe use and proper operation of
attention to the safety information provided in this
The following safety information must be observed by all
CP-991 Crimping
All rules and instructions for the work place must be
prevention of
This symbol is used to call your attention to hazards or unsafe practices which could result
in an injury or property damage. The signal word, defined below, indicates the severity of
the hazard. The message after the signal word provides information for preventing or
avoiding the hazard.
WARNING
CAUTION

3.1 Safety Warnings

•
•
•
Panduit Corp. recommends the tool be used with all installed safety features. Customer
assumes all liability for injury that could result from improper use of this tool and responsibility
for all necessary training to ensure safe operation of this tool.
•
FOR INSTALLATION AND USE BY TRAINED PERSONNEL ONLY.
•
IF ANY DAMAGE TO THE PRODUCT IS APPARENT OR SUSPECTED, DO NOT USE THE
PRODUCT. REFER PRODUCT TO QUALIFIED SERVICE PERSONNEL.
•
FCC WARNING: CHANGES OR MODIFICATIONS TO THE PRODUCT COULD VOID THE
USER'S AUTHORITY TO OPERATE THE PRODUCT.
•
USE RECOMMENDED ACCESSORIES. CONSULT THE OWNER'S MANUAL FOR
RECOMMENDED ACCESSORIES. THE USE OF IMPROPER ACCESSORIES MAY CAUSE
RISK OF INJURY TO PERSONS.
DO NOT OPERATE POWER TOOLS IN EXPLOSIVE ATMOSPHERES, SUCH AS
IN THE PRESENCE OF FLAMMABLE LIQUIDS, GASES OR DUST.
Power tools create sparks which may ignite the dust or fumes.
Provide adequate ventilation around the product.
PA29440A01_00 ENG
OPERATION MANUAL
Press.
accidents.
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury or
property damage.
WARNING
Read all safety warning and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your main-operated (corded) power
tool.
WARNING
manual.
observed,
Page: 5 of 26
CP-991 / CP-992
the CP-991 is the knowledge
persons who will work with the
especially those
ENGLISH
and
for
11-2018