Starting Up And Operating; Daily Care; Adjusting And Changing The Stripping Blade - Panduit CP-991 Mode D'emploi

© Panduit Corp. 2018
6.

Starting up and operating

6.1 Daily care

6.2 Adjusting and changing the stripping blade

PA29440A01_00 ENG
OPERATION MANUAL
Cleaning CP-991
WARNING: Risk of injury!
Disconnect the main plug and the compressed
air before you open the front door.
•
Switch off the CP-991 with the main switch
•
Disconnect the main plug
•
Disconnect the compressed air connection
•
Open the front door (1)
•
Empty the drawer (2)
•
Clean the inside
•
Replace the drawer (3)
•
Close the front door (4)
Checking the level of condensation
WARNING: Risk of injury!
Disconnect the main plug and the compressed
air before opening the drain valve.
•
Check the water level in the water separator (1)
If water is in the water separator:
•
Switch off the CP-991 at the main switch (2)
•
Disconnect the main plug (3)
•
Disconnect the compressed air connection (4)
•
Store the container (5)
•
Open the drain valve (6)
•
Drain the water
•
Close the drain valve (7)
•
Plug in the main plug
•
Connect the compressed air connection
Removing the stripping blade
WARNING: Risk of injury!
Disconnect the main plug and the compressed
air before you open the front door.
•
Pull the release lever (1) forwards
•
Remove the reversing base sleeve (2) downwards
Page: 18 of 26
CP-991 / CP-992
ENGLISH
11-2018