Work Sites; For Your Safety - Panduit CP-991 Mode D'emploi

© Panduit Corp. 2018

3.11 Work sites

NOTE: For operation and storage, avoid the following:
–
–
NOTE:
If the machine is moved from a cold location to a warm location, condensation
can form.
Before using the CP-991, open the front door and allow condensation to
evaporate.
NOTE:
•
•
NOTE:
–

3.12 For your safety

WARNING: The front door is installed for the safety of the operator. Under
no circumstances must it be modified, removed or bypassed using
attachments.
WARNING:
•
•
•
•
•
•
•
For safety reasons, the CP-991 automatically switches itself off if the
compressed air is disconnected.
WARNING:
•
PA29440A01_00 ENG
OPERATION MANUAL
humid or dusty places; and
locations exposed to high levels of heat, direct sunlight or low
temperatures [operating range: 59°F to 95°F (15°C to 35°C)]
Do not spill liquids on the CP-991
Do not expose the CP-991 to strong vibrations or shocks
Protect the compressed air hoses from heat, oil and sharp edges
Only use filtered compressed air with a maximum pressure of 6 bar.
WARNING:
Only operate the CP-991 when the front door is closed
Disconnect the main plug and the compressed air plug prior to all work that
requires opening the front door (e.g., retrofitting, remedial action)
Switch off the CP-991 and disconnect the device from the compressed air
during a break or when the device is not in use
Do not pull on the compressed air hose to disconnect the compressed air
Make sure that there are no foreign objects inside the housing
Before opening the housing, disconnect the main plug and disconnect the
device from the compressed air
Page: 10 of 26
CP-991 / CP-992
ENGLISH
11-2018