Safety Instructions - Dustcontrol DC Tromb Turbo EX Mode D'emploi

Safety instructions

Read the following safety instructions before starting the machine. Save the User Guide for future reference. Failure to comply
with the safety instructions voids the warranty and may result in personal injury and damage to the product. Dustcontrol is not
responsible for damage to the equipment caused by improper installation or improper operation of the equipment.
This machine must only be used in Zone 22, areas where an explosive atmosphere is not expected to occur during normal
operation, but if it does occur, it will only be for a short period. The product must only be used by qualified, knowledgeable
personnel in accordance with Workplace Directive 1999/92/EC.
Warning
This machine is intended for professional use only.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
Training, information and instructions on the handling of the dust extractor and the extracted dust must be
obtained prior to use. The machine must only be used by qualified personnel familiar with this handbook. The
machine must only be used for its intended purpose and only by qualified personnel familiar with this
handbook. Adhere to regulations regarding the material to be extracted.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
This machine is only intended for extraction of dry material.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
WARNING
ATEX: This machine is to be used in Zone 22 or outside explosive zones (air/inflammable dust) in areas where
an explosive atmosphere in the form of air-borne combustible dust is unlikely to occur during normal operation,
but if it does occur, it will only be for a short period.
WARNING
ATEX: The supplied connector is only intended for connection outside the zone. Standard CEE wall sockets
and grounded sockets of the Schuko type are not permitted in Zone 22. The machine must therefore be
connected to the power supply outside Zone 22.
DC Tromb Turbo EX, 17