Area Of Application; Functional Description - Dustcontrol DC Tromb Turbo EX Mode D'emploi

Power cord
Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
If using an extension cord, it must be waterproof.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.

Area of application

DC Tromb Turbo is for professional use. The machine is used to extract dust particles.

Functional description

Machine for suction and removal of dry, hazardous, inflammable, conductive dust according to dust class H in Zone 22. When
used for its intended purpose, the machine is therefore suitable for the separation of dry, hazardous, inflammable, non-conductive
dust with all limit values (dust with exposure limit values (ELV) and dust with carcinogenic substances).
The dust extractor uses negative pressure (suction) to force the air through a suction cover/nozzle, hose system, pre-separator
and dust separator. Coarse separation is carried out in the machine's cyclone, providing very effective separation of any coarse
dust. Fine dust is separated in the units filter. Reverse-pulse filter cleaning ensures extended filter life. The machine is fitted with a
HEPA filter.
The dust extractor is an electrically driven dust separator of robust design for use in connection with dust generating activities in
the industry. Dust extractors are suitable for collecting inflammable dust in Zone 22. Industrial dust extractors are intended for
suction and removal of dust deposits. Explosion protection is provided by insulation of the electrical parts and potential
equalization of the components that come into contact with dust.
The dust extractor is durable and reliable. It is particularly well suited to the suction and removal of dry, harmful, non-combustible
dust in filter class H.
The machine can be used at temperatures between +10 and +40°C and is suitable for general cleaning.
Regular cleaning of the workplace is important to prevent dust explosions.
ATEX This machine with accessories is suitable for use in Zone 22 (2014/34/EU) for suction and removal of:
This standard covers the safety of dust extractors with electric motors, including dust separators and back-pack vacuums, used
for wet extraction, dry extraction or wet-and-dry extraction, supplied for commercial use indoors and for outdoor use with and
without accessories for the collection of combustible dust in an atmosphere (Zone 22) designated as explosive.
DC Tromb Turbo EX, 19