Safety Instructions; Bodily Injuries; Functional Description - Dustcontrol DC F Tromb Mode D'emploi

Safety instructions

Read the following safety instructions Before operating the machine. Keep the User Guide. Failure to comply with the safety
instructions voids the warranty and may result in personal injury and damage to the machine. Dustcontrol is not responsible for
damage to the equipment caused by improper installation or improper operation of the equipment.
Warning
This machine is intended for professional use.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
Before use, you must receive training as well as information and instructions on how to handle the dust
extractor and the dust to be extracted.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
This machine is only intended for extraction of dry material.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
Work area environment
Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.

Bodily injuries

Never allow the extraction point to make contact with any part of the body. The strong negative pressure can damage blood
vessels in the skin.
WARNING
When installing, handling and transporting the machine, protective gloves must be worn to prevent personal
injury from sharp edges.
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.

Functional description

The pre-separator functions together with the dust extractor and uses vacuum (suction) to force the air through the suction cover/
nozzle. Coarse separation is carried out in the pre-separator's cyclone, which separates coarse dust highly effectively and greatly
assists the dust extractor.
The pre-separator has the following discharge options:
DC F Tromb, Art.nr. 44754 A 9