Kenwood TK-D740 Mode D'emploi page 11

Power input connector
Connect the DC Power Cable to this connector.
DISPLAY
The display shows the zone/ channel number and the 2 dots show various modes
of operation.
Display
Zone Display (Zone 1)
Channel Display (Channel 16)
Appears during Scan. (Sc)
Appears during the transceiver is
stunned. (St)
Appears when switch the
transceiver ON.
The Transceiver Password
function is programmed. (PS)
Appears when the Squelch Level
setting is activated. (SL)
Appears when the Talk Around
function is activated. (tA)
Appears when the Horn Alert
function is activated. (HA)
Appears when the Public
Address function is activated.
(PA)
Appears when the AUX function
is activated. (AU)
Appears when a channel is
added to the scan list. (cA)
Description Display
Appears when a channel is
removed from the scan list. (cd)
Appears when the Lone Worker
function is activated. (Ln)
Appears when sending data. (dt)
Appears when the channel is
busy.
The selected channel is the
Priority channel. (P)
Appears when the Scrambler
function is activated. (Sr)
Appears when the Scrambler
code mode is activated. (co)
Appears when the Message is
completed. (Ed)
Appears when the Call Interrupt
function is activated. (It)
Appears when the External
Speaker is selected. (SP)
Description
9