Displays And Function Keys - Klarstein HOT SPOT CRYSTAL Mode D'emploi

EN
20
Fix the 4 brackets to the wall with the expansion screw. The fixed brackets can be moved
to adjust the position to fix the glass panel.
Step 2
First remove the protective film on the
back of the glass. Then fix the glass panel
to the already attached wall bracket.
Note that the attached wall bracket can
be moved for the installation of the glass
panel. Then tighten the screws on the side
of each bracket cover (4 in total).

DISPLAYS AND FUNCTION KEYS

Control panel
Display
Signal Controller WiFi
Power
Mode
Temperature
Timer