Clean Filter; Install Filter - Gree GWH09QB-K3DNA6C/I Manuel D'utilisation

Clean and Maintenance

Clean filter

Open panel
1
Pull out the panel to a certain
angle as shown in the fig.
Remove filter
2
Remove the filter as in-
dicated in the fig.
WARNING
■ The filter should be cleaned every three months. If there is much dust in the
operation environment, clean frequency can be increased.
■ After removing the filter, do not touch fins to avoid injury.
■ Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Clean filter
● Use dust catcher or water to
3
clean the filter.
● When the filter is very dirty, use
the water (below 45℃ ) to clean
it, and then put it in a shady
and cool place to dry.

Install filter

4
Install the filter and then close the
panel cover tightly.
17