Finishing Flange Adjustment - Napoleon Altitude X Serie Manuel D'installation

finishing
EN
9.6

finishing flange adjustment

Depending on the thickness of finishing material we have allowed up to 3/4" (19mm) of adjustment after the 1/2"
(13mm) non-combustible board has been installed. Adjust the finishing flange to the desired position.
Finishing
material
Finishing flange (the finishing flange defines the perimeter
of the fireplace opening. Framing or finishing materials must
NEVER encroach inside the finishing flange).
42
W415-1935 / G / 05.10.22
note:
Screw count varies by model.
Finishing
flange
AX36
illustrated.
3/4" max.