Transport - Leister VARIMAT V2 Instructions D'utilisation

Transport

Use the storage case included in the scope of delivery as transport protection for
the automatic hot-air welding machine VARIMAT V2. The storage case is provided
with a handle and transport rollers.
VARIMAT V2 may not be lifted with additional weight (22) and end weight (23).
Carrying handles on the storage case as well as Carrying handle (24) and
guide bar (27) on the hot-air welding machine may not be used as transport
help by crane.
For lifting up the hot-air welding machine by hand use carrying handle (24)
and guide bar (27).
For transport preparation let welding nozzle (9) of the VARIMAT V2 cool down
Moving VARIMAT V2 out of carrying case:
Open carrying case at top
1
Open carrying case at sides
2
Open clamping screw, lower guide bar (31) and move lower guide bar (26) into required position;
3
tighten clamping screw, lower guide bar (31)
Open clamping lever, upper guide bar (28)
4
Adjust upper guide bar (27) to required height; tighten clamping lever, upper guide bar (28)
Carefully move the automatic hot-air welding machine VARIMATV2 out of the carrying case
5
Moving VARIMAT V2 in carrying case:
Carefully move the automatic hot-air welding machine VARIMAT V2 from the side in the carrying case
5
Open clamping lever, upper guide bar (28) and move in upper guide bar (27);
4
tighten clamping lever, upper guide bar (28)
3
Open clamping screw, lower guide bar (31) and move guide bar (27) into transport position;
tighten clamping screw, lower guide bar (31)
2
Close carrying case at sides
1 Close carrying case at top
Transport:
For transporting the storage case by hand use carrying handles.
6
22
1
3
2
4 5
27
24
22
23
6