auna KR-100 Mode D'emploi page 14

Radio de cuisine bluetooth pour suspension sous placard, meuble, étagère (port usb frontal et tuner fm, double alarme, micro pour kit mains libres)
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Press MODE repeatedly, until the display shows "FM".
Press and hold the INFO/MENU button to enter the menu to select "Scan setting" and "Audio setting".
Enter the scan settings to adjust the scan sensitivity (find strong stations only, or find all stations).
Enter the audio settings to toggle "Stereo allowed" and "forced mono".
Use the arrow buttons, for manual tuning.
Press PLAY/PAUSE for an automatic scan for stations.
In either DAB or FM mode, you can store up to 10 stations into the favourite presets; this will enable you to
get direct access to your favourite stations.
To store a preset, first tune to your desired station, then press and hold the MEMORY button, the display will
show "#: (Empty)". Press the arrow buttons to select your desired preset number and press the PLAY/PAUSE
to confirm your selection and store the current station to the selected preset number.
To recall a preset station, first press the MEMORY button once, cycle through the presets with the arrow
buttons and press PLAY/PAUSE to listen to the selected station.
Repeatedly press the MODE button to select BT mode
Make sure BT is activated on your mobile phone. Place it near the radio.
Pair with the KR-100.
In case that you are prompted for a passkey, enter either "0000" or "8888".
To answer and end incoming phone calls during playback, press MODE.
To reject an incoming phone call during play, press and hold MODE for two seconds.
Please note: Some mobile phones may connect or disconnect as you make and end calls. This is not
an indication of a problem with your unit.
14
Radio: FM
Radio: Station Memory
BT
www.auna.de

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003074510030746

Table des Matières