Vornado PIVOTC Guide Du Propriétaire page 6

or a cord/plug with a safety device such as a fuse. Use only the power cord and
plug provided.
- Before plugging power cord into electrical outlet, be sure that all electrical
information on the rating label, including voltage, is compatible with your
outlet's power supply.
- Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
- While the product is plugged in, do not insert or allow foreign objects to enter
any input or output opening as this may cause risk of electric shock or fi re, or
damage the product.
- A loose fi t between wall outlet (receptacle) and plug may cause overheating
and distortion of the plug. Discontinue use of the product in this outlet.
Contact a qualifi ed electrician to replace loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the other.) To
reduce the risk of electrical shock, this plug is intended to fi t in a polarized
outlet only one way. If the plug does not fi t fully in the outlet, reverse the plug.
If it still does not fi t, contact a qualifi ed electrician. Do not attempt to defeat
this safety feature.
- Before moving, repositioning, servicing, cleaning and when not in use, use
the product controls to turn off the power and then unplug. To disconnect
from outlet, grasp and pull only the plug. Also, power off and unplug if the
product will be left unattended for an extended period of time or during
electrical storms.
SERVICING WARNING—To reduce risk of fi re, electrical shock and injury to
persons, observe the following:
- Clean your product regularly, only as is instructed in this manual. Prior to
cleaning, turn off the power on your product and unplug. Do not use gasoline,
thinners, solvents, ammonias or other chemicals for cleaning. Refer to the
CLEANING instructions provided.
6 English
RANGEMENT
Si vous décidez de ranger le ventilateur parce que la saison chaude est terminée
ou que vous ne l'utiliserez pas pendant longtemps, il est recommandé de suivre les
instructions de rangement suivantes pour prolonger sa durée de vie :
Il est recommandé de nettoyer le ventilateur
chauffant avant de le ranger.
1. Débranchez le cordon d'alimentation et enroulez-
le lâchement.
2. Recouvrez l'appareil ou remettez-le dans son
carton d'emballage si possible. Cette mesure
empêche la poussière de s'accumuler sur le
ventilateur à la longue.
3. Rangez le ventilateur dans un endroit frais et sec.
Français 43