Blackout-Socket; Dmx-512 Connection / Connection Between Fixtures - Futurelight EVO-WATER Mode D'emploi

Blackout-socket

If you wish to lock the light output - e.g. via an optional footswitch (Blackout-mode), connect your footswitch
via a stereo-jack plug to the Blackout-socket.
Stereo 1/4" jack-plug:
Tip Ring Sleeve
- 5 V Black Out Ground

DMX-512 connection / connection between fixtures

The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
Occupation of the XLR-connection:
28/61 51837590_V_1_0.DOC