Safety Recommendations - SKF TIH 240 Mode D'emploi

«БЕРГ АБ», (495) 727-22-72, promshop-biz@ya.ru, www.promshop
The operating instructions should always be followed.
–
Since a magnetic field is generated by the induction heater,
–
people wearing a pacemaker should not work with or be in the
immediate vicinity of the apparatus. Other sensitive electronic
equipment such as wrist watches might also be affected.
Make sure the supply voltage is correct.
–
Sometimes there might be a potential difference between big
–
components and the core/housing. This might result in
mini-arching between the component and the core/housing.
This is not dangerous for human beings or the workpiece.
However, the equipment should not be used in areas where there
is a risk for explosion.
Do not expose electronic components to high humidity.
–
Never start the heater without a yoke in position.
–
Never modify the heater.
–
All repair work should be taken care of by a SKF repair shop.
–
«БЕРГ АБ», (495) 727-22-72, promshop-biz@ya.ru, www.promshop
4

Safety recommendations

SKF TIH 240