Tristar AC-5413 Mode D'emploi page 43

USER'S MANUAL
1
Split Wall-Mounted Air Conditioner
Adjust airflow direction
Up/down direction can be adjusted by using the VANE CONTROL button on the remote control. This button cycles
through the modes as follows:
Change to the VANE CONTROL mode.
To change the VANE CONTROL velocity press the FAN SPEED button.
Each time the button is pressed, fan speed is changed in sequence, from
To cool the whole room, use the
use the SLEEP mode.
Recommended horizontal VANE
range.
Use in the
positions (1) or
COOL or DRY modes and
positions (3) to
HEAT mode when adjusting to
your requirements.
NOTE
In cooling operation, when the air conditioner is operated
with VANE CONTROL blowing down (4) or (5) for 1 hour,
the VANE CONTROL direction is automatically set to level
to prevent condensed water from dropping.
Adjust the vertical VANE CONTROL direction using the
remote control. If the horizontal vanes are moved manually,
it may cause trouble.
In heating operation, if the output air temperature is too low
or when defrosting is done, the horizontal vane position is
set to (1)
SWING ADJUSTMENT
Press the SWING button
To stop the SWING operation mode;
Press the SWING button again
If the SWING button is pressed during swing
6
Adjusting up/down airflow direction
(1) (2)
(HI) mode, (COOL MODE). If the sound of the operating unit disturbs your sleep,
COOL
DAY
(AUTO)
(2) in
(5) in
HEAT
(3) (4) (5) (AUTO)
[Lo]
Adjusting left/right air flow direction
Adjust the direction by manually changing the
left/right airflow direction adjusting fin.
[Mid] [Hi] [AUTO],
CAUTION
When adjusting the
direction, stop air
conditioner.