English; Deutsch; Français; Español - HellermannTyton AT2000 CPK Manuel D'utilisation

Service menu

6 .3 Main menu

Bindings cannot be triggered while you are navigating in the
main menu. The Signal
blue.
f Press the Enter button.
; The Main menu appears on the display.
34
Main menu
Languages
Status
Settings
Contact
Back

6 .4 Languages menu

You use the Languages
the menus.
35
Languages

Deutsch

English

Italiano

Français
Türkçe

Polski

Español
f Use the Select button to select the language of your
choice.
f Press the Enter button.
; The display switches to the language you selected.

6 .5 Status menu

The Status menu shows you the following status readings.
36
Status
Counter reading 00070725
Tool software 1.17
Power-pack SW 1.04
Serial number 00000013
Temperature 26
Humidity 32
Last service 04.07.2013
Cntr.rdng.lastSer 0000000
14
LED on the power pack CPK shows
menu to select the language for

6 .6 Settings menu

You use the Settings menu to set important parameters
of the AT2000 CPK.
Access to the Settings
access code that can be changed in the HT Data Manage-
ment software, à „Changing the access code in the
AT2000 CPK" on page 18. The default access code is 000.
f Use the Select button in the
Settings menu.
f Press the Enter button.
; The prompt for the access code appears on the display.
37
Settings
Access code 0 0 0
f Use the Select button to enter each digit of the access
code.
f Press the Enter button to confirm each digit.
; The Settings menu appears on the display.
38
Settings

Force level

Quality
Interruption front sensor
Date / Time
Check of binding
Back
6 .6 .1 Force level
The Force level setting corresponds to the force applied
by the AT2000 CPK when binding, and it can be set
from Level 1 (lowest force) to
39
Settings
Force level
Level 1
Level 2
Level 3
Level 4
Level 5
Back
f Use the Select button to select the force level of your
choice.
f Press the Enter button.
; The setting changes to the level you selected.
menu is protected by a three-digit
Main menu to select the
Level 5 (highest force).
AT2000 CPK• Operating Instructions • 04-2015 • 106-29004