Quality; Check Of Binding; Interruption Front Sensor; Date / Time - HellermannTyton AT2000 CPK Manuel D'utilisation

6 .6 .2 Quality

The Quality setting corresponds to the quality of binding
and it can be set from Level 1
(highest quality). The higher the quality the longer the
cycle time, so the bundle has more time to settle.
40
Settings
Quality
Level 1
Level 2
Level 3
Back
f Use the Select button to select the quality of your choice.
f Press the Enter button.
; The setting changes to the quality you selected.

6 .6 .3 Check of binding

The Check of binding setting enables you to decide
whether or not the Error, binding force
message appears on the display, à „Display messages"
on page 22.
42
Settings
Check of binding
Off
Error notification
Acknowledgement
Back
f Use the Select button to select the option of your choice.
f Press the Enter button.
; The setting changes to the option you selected.
Setting
The Error, binding force message does
Off
The Error, binding force message appears
Notification
when applicable but does not require confirmation.
The Error, binding force message appears
Confirmation
when applicable and requires confirmation.
The next binding is not possible until the trigger
has been pulled to confirm the message.
AT2000 CPK • Operating Instructions • 04-2015 • 106-29004
(lowest quality) to Level 3
Meaning
not appear on the display.

6 .6 .4 Interruption front sensor

The Interruption front sensor
decide how long the front sensor can remain busy
without the Error, front cap
display. This function is intended for use with the device
integrated into an automatic system.
41
Settings
Interruption front sensor
Level 1 0.0 sec.
Level 2 0.3 sec.
Level 3 0.5 sec.
Level 4 0.7 sec.
Level 5 0.9 sec.
Back
f Use the Select button to select the level of your choice.
f Press the Enter button.
; The setting changes to the option you selected.

6 .6 .5 Date / time

You can set the Date / time
63
Settings
Date 1 8 . 0 2 . 1 5
Clock time 1 0 : 2 3
f Use the Select button to change the date and time,
as applicable.
f Press the Enter button to confirm each digit.
; The setting changes to the option you selected.
Date and time can also be synchronised with the PC date
and time, à „Synchronising time and date" on page 18.

6 .7 Contact menu

The Contact menu shows you the current website with
country-specific contact data.
43
Contact
www.HellermannTyton.com
Service menu
setting enables you to
message appearing on the
for process documentation.
15