Description Of Symbols - Silverline 265897 Mode D'emploi

GB

Description of Symbols

The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Caution!
Conforms to relevant legislation and
safety standards
Environmental Protection
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice
4
Original Instructions
Specification
Voltage: ....................................................230V~, 50Hz
Power: ................................................................500W
No load speed: ..........................................0-3000min
Impact rate: ............................................0-46,400bpm
Chuck size: .............................................2-13mm (
Protection Class: .....................................................
Power cable length:.................................................2m
Weight: ............................................................. 1.73kg
Max drilling capacity:
Concrete ............................................................16mm
Wood .................................................................25mm
Steel ..................................................................13mm
Sound pressure L : ..........................................89dB(A)
PA
Sound power L : ...........................................100dB(A)
WA
Uncertainty: ...........................................................3dB
Weighted vibration:
Drill mode (metal) .........................................2.33m/s
Hammer mode (concrete) ...... ........................ 8.39m/s
Uncertainty: .................................................... 1.5m/s²
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
As part of our ongoing product development,
specifications of Silverline products may alter
without notice.
WARNING: Always wear ear protection where the sound level
exceeds 85dB(A) and limit the time of exposure if necessary.
If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection
is correctly fitted and provides the correct level of sound
attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss
of sense of touch, numbness, tingling and reduced ability to
grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands
below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of
operating the tool.
Sound and vibration levels in the specification are determined
according to EN60745 or similar international standards. The
figures represent normal use for the tool in normal working
conditions. A poorly maintained, incorrectly assembled, or
misused tool may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to
domestic users who use tools for long periods of time.
-1
⁄ ")
1
2
2
2