Description Of Symbols; Environmental Protection - Silverline 248196 Consignes De Sécurité

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class II construction (double insulated for additional protection)
Caution!
DO NOT incinerate batteries!
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice
Batteries containing cadmium must not be disposed of with household
waste. Contact your local waste disposal authority for information on the
correct way to dispose of batteries containing cadmium.
c
d
4
Specification
Drill:
Voltage .................................................18V
Gears ....................................................2
No load speed .......................................0 – 350/0-1250min-
Blows per min (BPM) ............................0-16250
Chuck capacity .....................................13mm (
Torque settings: ....................................16+2
Max Torque: ..........................................30Nm
Weight: .................................................1.5kg
Drilling Capacities:
Mild steel ..............................................8mm
Wood ....................................................20mm
Masonry ...............................................13mm
Battery:
Cell type................................................Ni-Cad
Voltage .................................................18V (15x 1.2V), DC
Capacity ...............................................1.3Ah
Charger:
Input power ..........................................220 –240V~50/60Hz, 20W
Output power ........................................24V, DC, 400mA
Charging time: ......................................3-5hrs
Cable length .........................................2m
Protection class ....................................
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
Sound level information:
Sound pressure L ...............................77.7dB(A)
PA
Sound power L ..................................92.1dB(A)
WA
Uncertainty: ..........................................3dB
Weighted Vibration: ...............................10.08m/s² (impact drilling)
Uncertainty K: .......................................1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition.
If necessary, limit the length of time exposed to vibration and use anti-vibration gloves.
Do not operate the tool with hands below a normal comfortable temperature, as vibration
will have a greater effect. Use the figures provided in the specification relating to vibration
to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration. www.osha.europa.eu provides
information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
-1
")
½
2.10m/s² (drilling)
0.76m/s² (screwdriving)