Procopi Wewa Rectangle Notice De Montage page 54

WEVA RECTANGULAR POOLS
> >
Figure 14
CAUTION
While assembling
◗
the slats, make sure
as of the beginning
that the tongues
are fully engaged in
the grooves.
54
THE WALLS (CONT.) & DRESSING THE POSTS
> >
8
Figure 15
Figure 13
◗
Start by unrolling the strips of asphalt (fi g.
13) that will insulate the wooden structure
from the concrete slab.
◗ Lay out the ½ slats 'ref. 8' that make up the
pool widths, then at the corners fi t them
into the slats marked '1' that make up the
pool lengths (fi g. 14).
◗
After positioning the 1st layer of slats,
check that the diagonals are equal.
◗ Screw the slats together using screws from
bag C as shown in fi g 14.
◗ Be careful to remove any splinters as you
go.
1
◗ The slats should be fi xed to the metallic
posts as they are slotted into position
(these are pre-drilled) with screws 6x30
from bag D.
5x40
sachet C
bag C