Preparations For Installation; Standard Fittings - Gree GMV-NX140P/A X1.2-K Manuel D'utilisateur

3 Preparations for Installation

Notes: Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wired Controller
Screw M4X25 (Cross
2 recessed small pan head
screw)
3 Drain Hose Sub-assy
4 Union Nut Sub-assy
5 Nut with Washer M10X8
Nut M10 (Type 1 Hex Nut
6
M10X8.4))
Washer 10
7
(Spring Washer M10X2.6)
8 Insulating Jacket of Header
Insulating Jacket of Liquid-
9
in Pipe
10 Sponge of Drain Pipe
11 Cable Tie
12 Installation Paper Pattern
Note: The fittings list above is subject to change without notice, please refer to the packing list
provided with indoor unit.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Duct Type Indoor Unit
Graphics Quantity
1 PC
3 PC
1 Set
1 Set
4 PC
4 PC
4 PC
1 PC
1 PC
2 PC
8 PC
/ 1 PC
5
Function
Control indoor unit
Secure the wired controller
Connect drain pipe
Connect exit pipe
Hang indoor unit
Hang indoor unit
Hang indoor unit
Wrap the joint of header
Wrap the joint of liquid-in pipe
Wrap the joint of drain pipe
Wrap the joint sponge
For drilling hole in the ceiling