Preparations For Installation; Standard Fittings; Installation Position Selection - Gree GMV-ND22T/B-T Manuel D'utilisateur

Filter Cleaning Reminding
Function
I Feel
Light Function
Swing
Note!
① √: included, X: not included.
② Please refer to the user manual of Wired Controller or Remote Controller for function details.

3 Preparations for Installation

Note: this picture is for reference only, please refer to the actual product; the unit of dimension
is mm.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No.
1 Drainage hose assembly
2 Special Nut
3 Insulation
4 Insulation
5 Sponge
6 Fastener
paper pattern for
7
installation
Tapping screw with
8
washer
9 Remote controller
10 Washer fixing plate

3.2 Installation Position Selection

(1) The location should be able to withstand the weight of unit.
(2) The water can be drained conveniently from drainage pipe.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Cassette Type Indoor Unit
Name Appearance Q'ty
1 To connect the drainage pipe
To be used for connecting the
1
refrigerant pipe
1 To insulate the gas pipe
1 To insulate the liquid pipe
2 To insulate the drain pipe
4 To fasten the sponge
1 Locate the drill hole on ceiling
4 Fix paper pattern
1+2 To control the indoor unit
Prevent the washer from falling
4
off
4
Usage